- Zhejiang Marui Power Machinery Co.,Ltd
- TEL: +86-577-65396111
- E-mail: firstname.lastname@example.org
- Phone: +8613567762679
There are two distinctions when working, one is the ignition explosion mode of the gasoline category and the other is the compression explosion mode of the diesel category.
The first is through the opening of the exhaust valve to close the exhaust valve, so that the air into the cylinder through the carburetor into the gas mixture, then the piston is moving straight down until the stop point;
Then, when the compression work is performed, the intake valve and the exhaust valve are closed at the same time, and then the piston moves straight up until it reaches the stop point;
Secondly, when the work is started, the spark plug is ignited in the combustion chamber, causing the combustible gas to explode so that its temperature rises sharply and the expansion piston starts to move downwards;
Finally, the inertia of the piston during exhaust takes an upward linear motion, when the intake valve is closed and the exhaust valve is open. It is this one cycle of work done.